SONY projector VPL-FHZ80/B 6000lm, WUXGA, Laser, Op.Lenses, Black
SONY projector VPL-FHZ80/B 6000lm, WUXGA, Laser, Op.Lenses, Black
VPL-FHZ80/B 6000lm, WUXGA, Laser, Op.Lenses, Black
The industry‘s smallest, lightest 6,000 lumen projector with innovative features.
Display system
Display system: 3 LCD system
Display device
Size of effective display area: New LCD panel 0.76" (19 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels: 6,912,000 (1920 x 1200 x 3) pixels
Projection lens *: 1
Focus: Powered
Zoom - Powered/Manual: Powered
Zoom - Ratio: Approx. x 1.6
Throw ratio: 1.39:1 to 2.23:1
Lens shift - Powered/Manual: Powered
Lens shift - Range Vertical: -5%, +70%
Lens shift - Range Horizontal: +/- 32%
Light source
Type: Laser diode
Screen size
Screen size: 40'' to 600'' (1.02 m to 15.24 m) (measured diagonally)
Light output *: 2
Mode: Standard: 6000lm *3 / 6500lm (Center)*4
Mode: Middle: 4800lm
Mode: Low-
Colour light output *2
Mode: Standard: 6000lm
Mode: Middle: 4800lm
Mode: Low-
Time until light output declines to 50 %*5
Mode: Standard: 20000 hours
Mode: Middle: 30000 hours
Contrast ratio (full white / full black) *2
Contrast ratio (full white / full black): infinity:1
Displayable scanning frequency
Horizontal: 15 kHz to 93 kHz
Vertical: 23 Hz to 63 Hz
Accepted signal resolution
Computer signal input: Maximum signal resolution: 1920 x 1200 *6
Video signal input: NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p,3840/60p, 3840/30p, 3840/25p, 3840/24p,4096/60p, 4096/30p, 4096/25p, 4096/24p
Keystone correction (Max.)
Horizontal: +/- 30 degrees
Vertical: +/- 30 degrees
INPUT OUTPUT (Computer / Video / Audio / Control)
INPUT A: RGB / Y PB PR input connector:Mini D-sub 15 pin (female)
Audio input connector: Stereo mini jack
INPUT B: DVI input connector: DVI-D 24-pin (single link), HDCP support
Audio input connector: Shared with INPUT A
INPUT C: HDMI input connector: HDMI 19-pin, HDCP support
Audio input connector: HDMI audio support
INPUT D: HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control)
VIDEO IN: Video input connector: BNC
Audio input connector: Shared with input A
OUTPUT A: Monitor output for Input A Connector: Mini D-sub 15-pin (female)
Audio output connector: Stereo mini jack
OUTPUT B: Monitor output for Input B Connector: DVI-D 24-pin (single link), HDCP not supported
Audio output, Monitor out connector: Stereo mini jack
REMOTE: D-sub 9-pin (male) / RS232C
LAN: RJ45, 10BASE-T/100BASE-TX
IR (Control S)Stereo mini jack, Plug in power DC5V
USB: TYPE-A (for F/W update) , TYPE-A (for Power supply)
Acoustic Noise *2
Acoustic Noise (Mode: Standard / Middle): 36 dB / 34 dB
Operating temperature / Operating humidity
Operating temperature / Operating humidity: 0°C to 45°C (32°F to 109°F) / 20% to 80% (no condensation)
Storage temperature / Storage humidity
Storage temperature / Storage humidity: -10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation)
Power requirements
Power requirements: AC 100 V to 240 V, 5.1 A to 2.2 A, 50 Hz / 60 Hz
Power consumption
AC 100 V to 120 V: Mode: Standard: 397 W
AC 220 V to 240 V: Mode: Standard: 378 W
Power consumption (Standby Mode)
AC 100 V to 120 V0.5W (when “Standby mode” is set to “Low”)
AC 220 V to 240 V0.5W (when “Standby mode” is set to “Low”)
Power consumption (Networked Standby Mode)
AC 100 V to 120 V: 9.8 W (LAN)
10.6 W (HDBaseT)
10.6 W (All Terminals and Networks Connected) (when "Standby Mode" is set to "Standard")
AC 220 V to 240 V: 10.9 W (LAN)
11.6 W (HDBaseT)
11.6 W (All Terminals and Networks Connected) (when "Standby Mode" is set to "Standard")
Standby Mode / Networked Standby Mode Activated
Standby Mode / Networked Standby Mode Activated: Approx. 10 Minutes
Heat dissipation
AC 100 V to 120 V: 1355 BTU/h
AC 220 V to 240 V: 1290 BTU/h
Dimensions (W x H x D)
Dimensions (W x H x D) (without protrusions): 460 x 169 x 494 mm
18 1/8 x 6 3/4 x 19 1/2 inches
Mass
Mass: Approx. 13 kg (28 lb)
Optional accessories
Projection Lens: VPLL-3003 / 3007 / Z3009 / Z3010 / Z3024 / Z3032